Manager Sales and Marketing

Jonas Nicoll
Manager Sales and Marketing

telefon +49 7121 894-181
jonas.nicoll@berghof.com

Foils made from Optical PTFE

Foils

We process our Optical PTFE into flexible foils with strengths from 0.1 to 0.6 mm for the use as diffusor foils in transmission or in different reflection grades as reflection coatings. When processing the skived sheets, the unique lambertian surface structure remains and allows a homogeneous, diffuse reflection of up to > 99 percent, or rather with thin foils an even light throughput (transmission) across the wide wave length of 250 to 2,500 nm. Thereby, various applications in the field of diffuse light scattering are feasible.

Reflection Foils

Reflectors by Berghof – made from ultrapure, Optical PTFE and processed to flexible foils in customized strengths – reach highest, diffuse reflection of up to > 99 percent. By adding specific pigments, we can also produce them in different gray scales.  Upon request, we can equip these reflection foils with self-adhesive properties and cut them to different sizes so they can be adjusted onto different surfaces as coatings. Possible applications are for example linings for UV sterilisators or coatings for reflectance screens. Attached to so-called “reflectance targets”, reflectors are used as targets for calibrating optical systems such as for cameras of driver assistance systems.

Advantages

  • Different material strengths between 0.1 and 6.0 mm available

  • Flexible foils, also suitable as linings for hollow bodies

  • Available as customized roll width of 10 to 600 mm as tapes (standardized width 100 mm)

  • Different gray scales for calibrated reflection: 70, 50, 20, 5, 2 %R

  • Surface homogeneity (gray scales) +/– 1%R

  • Linearity of spectrum (gray scales) +/– 0.5 % 

  • High energy density limit of up to ~8 J/cm³ (laser damage threshold) 

  • Robust surface, more robust against abrasion than comparable surface coatings

  • For easy processing, foils can be equipped with self-adhesion, welded or clamped

  • Customized reflections and sizes available upon request

  • Calibration available upon request (PerkinElmer Lambda 950S)

Applications

  • Lamps and LED reflectors

  • Coatings for UV sterilizers

  • Linings for photobioreactors

  • Reflectors for display and background lighting

  • Projection screens

  • Calibration and contrast measurement of optical measuring instruments such as spectrophotometers or LIDAR systems

  • White balance of camera systems

  • Linearity tests of optical measuring instruments such as colorimeters

Download

Transmission Foils

The transmission degree of the foil increases considerably at a minimal material strength (< 1 mm) and the transmission foils made from Optical PTFE show very low backscattering characteristics. This is why the foils are suited as diffusors in the lighting industry. Another area of use are so-called cosine correctors in sensors for detecting light irradiation within a 180° field of vision with as little directional sensitivity as possible.

Advantages

  • Different material strength between 0.1 and 6.0 mm available

  • Available as customized roll width of 10 to 600 mm as tapes (standardized width 100 mm)

  • As flexible foils or stamped parts available

  • High energy density limit of up to ~8 J/cm³ (laser damage threshold)

  • For easy processing, foils can be equipped with self-adhesion, welded or clamped

  • Customized reflections and sizes available upon request

  • Calibration available upon request

Applications

  • Cosine diffusors for optical detectors

  • UV Spectroradiometers

  • UV sensors in Wearables (Smart Watch), or in smartphones as radiation monitoring

  • Light scattering foils for lights / LED

  • Plasma monitoring